Fire resistant Central Loose Tube Fiber Optic cables 
  
Standards  
  Basic design to Telcordia GR-20 / RUS 7 CFR 1755.900 (REA PE-90) / ICEA S  87-640 
  FIRE PERFORMANCE 
  
     
      Circuit Integrity  | 
    IEC 60331-25; BS 6387 CWZ; DIN VDE    0472-814(FE180);  
      CEI 20-36/2-1; SS229-1; NBN C 30-004 (cat. F3); 
      NF C32-070-2.3(CR1)  | 
   
  
    System circuit integrity  | 
    DIN 4102-12, E30 depending on lay system  | 
   
  
    Flame Retardance (Single Vertical Wire    Test)  | 
    EN 60332-1-2; IEC 60332-1-2; BS EN    60332-1-2; VDE 0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2);  
      CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*  | 
   
  
    Reduced Fire Propagation    (Vertically-mounted bundled wires & cable test)  | 
    EN 60332-3-24 (cat. C); IEC 60332-3-24;    BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1);    CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4  | 
   
  
    Halogen Free  | 
    IEC 60754-1; EN 50267-2-1; DIN VDE    0482-267-2-1;  
      CEI 20-37/2-1 ; BS 6425-1*  | 
   
  
    No Corrosive Gas Emission  | 
    IEC 60754-2; EN 50267-2-2; DIN VDE    0482-267-2-2;  
      CEI 20-37/2-2 ; BS 6425-2*  | 
   
  
    Minimum Smoke Emission  | 
    IEC 61034-1&2; EN 61034 -1&2; DIN    VDE 0482-1034-1&2;  
      CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*  | 
   
  
    No Toxic gases  | 
    NES 02-713; NF C 20-454  | 
   
 
Note: Asterisk * denotes superseded  standard. 
  CABLE CONSTRUCTION 
  Fibers: Singlemode and multimode fibers, with loose tube technology. 
  Structure: Central loose tube cable contains one tube with 2-24 single or  multimode fibers, which are filled with water blocking gel.  
  Fire barrier: The jelly filled tube with up to 24 fibers is wrapped with a fire  blocking mica glass tapes. 
  Water blocking: The jelly filled tube is waterblocked by using swellable tape  and thread. 
  Reinforcement: Either aramid yarn or fiber glass is wound around the tube to  provide physical protection and tensile strength, with added fire protection. 
  Inner sheath (optional): The cable can be jacketed with either PE or  thermoplastic LSZH inner sheath. PE is the preferred option in outdoor environment  for water protection purpose.  
  Moisture Barrier Tape (optional): An aluminum moisture tape can be incorporated  under the sheath for water blocking and shielding purpose. 
  Armouring(optional):  
  For diect burial, either galvanized steel wire braid, corrugated steel tape  armour or galvanized steel wire armour is applied over an inner polyethylene or  LSZH sheath. For steel tape armour, the 0.15mm thick steel tape is coated with  a copolymer and applied with an overlap. For steel wire braid or armour, single  layer of galvanized steel wire braid or armour is applied. 
  Ripcord (optional): An optional ripcord can be located under the jacket to  facilitate jacket removal. 
  Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS  7655-6.1(Thermosetting LSZH compound type SW2-SW4 as per BS 7655-2.6 can be  offered.)  
CONSTRUCTION PARAMETERS 
  
     
      Cable Code  | 
    Fiber Count  | 
    Tube Diameter  | 
    Nominal Overall Diameter  | 
    Approx.Weight  | 
    Tension load  | 
    Crush  | 
   
  
     | 
    (n°)  | 
    mm  | 
    mm  | 
    kg/km  | 
    N  | 
    N/100mm  | 
   
  
    CLA-B-C-H-J-FR  | 
    02-06  | 
    2.7  | 
    8.0  | 
    70  | 
    1000  | 
    1500  | 
   
  
    CLA-B-C-H-J-FR  | 
    08-16  | 
    3.5  | 
    9.0  | 
    90  | 
    1200  | 
    1500  | 
   
  
    CLA-B-C-H-J-FR  | 
    18-24  | 
    4.2  | 
    10.0  | 
    100  | 
    1500  | 
    1500  | 
   
 
Steel Wire Braid 
  CONSTRUCTION PARAMETERS 
  
     
      Cable Code  | 
    Fiber Count  | 
    Tube Diameter  | 
    Nominal Overall Diameter  | 
    Approx.Weight  | 
    Tension load  | 
    Crush  | 
   
  
     | 
    (n°)  | 
    mm  | 
    mm  | 
    kg/km  | 
    N  | 
    N/100mm  | 
   
  
    CLA-B-C-2Y(SWB)H-J-FR  | 
    02-06  | 
    2.7  | 
    11.5  | 
    160  | 
    1000  | 
    2000  | 
   
  
    CLA-B-C-2Y(SWB)H-J-FR  | 
    08-16  | 
    3.5  | 
    12.0  | 
    180  | 
    1200  | 
    2000  | 
   
  
    CLA-B-C-2Y(SWB)H-J-FR  | 
    18-24  | 
    4.2  | 
    13.0  | 
    200  | 
    1500  | 
    2000  | 
   
 
Corrugated Steel Tape Armour 
  CONSTRUCTION PARAMETERS 
  
     
      Cable Code  | 
    Fiber Count  | 
    Tube Diameter  | 
    Diameter  | 
    Approx.Weight  | 
    Tension load  | 
    Crush  | 
   
  
     | 
    (n°)  | 
    mm  | 
    mm  | 
    kg/km  | 
    N  | 
    N/100mm  | 
   
  
    CLA-B-C-2Y(STA)H-J-FR  | 
    02-06  | 
    2.7  | 
    13.0  | 
    200  | 
    1000  | 
    2500  | 
   
  
    CLA-B-C-2Y(STA)H-J-FR  | 
    08-16  | 
    3.5  | 
    14.0  | 
    220  | 
    1200  | 
    2500  | 
   
  
    CLA-B-C-2Y(STA)H-J-FR  | 
    18-24  | 
    4.2  | 
    14.5  | 
    250  | 
    1500  | 
    2500  | 
   
 
Steel Wire armour 
  CONSTRUCTION PARAMETERS 
  
     
      Cable Code  | 
    Fiber Count  | 
    Tube Diameter  | 
    Nominal Overall Diameter  | 
    Approx.Weight  | 
    Tension load  | 
    Crush  | 
   
  
     | 
    (n°)  | 
    mm  | 
    mm  | 
    kg/km  | 
    N  | 
    N/100mm  | 
   
  
    CLA-B-C-2Y(SWA)H-J-FR  | 
    02-12  | 
    2.7  | 
    10.5  | 
    180  | 
    2500  | 
    4000  | 
   
  
    CLA-B-C-2Y(SWA)H-J-FR  | 
    16-24  | 
    3.5  | 
    11.0  | 
    210  | 
    2500  | 
    4000  | 
   
 
  
   |