Flame Retardant Individual and Overall Screened Instrumentation Cables (multipair)
H-Pimf.jpg)
STANDARDS
Basic design to BS 5308 Part1 Type1 & 2
FIRE PERFORMANCE
Flame Retardance (Single Vertical
Wire Test) |
EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE
0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1* |
Reduced Fire Propagation
(Vertically-mounted bundled wires
& cable test) |
EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4 |
Halogen Free |
IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1* |
No Corrosive Gas Emission |
IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2* |
minimum Smoke Emission |
IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2* |
No Toxic gases |
NES 02-713; NF C 20-454 |
Note: Asterisk * denotes superseded standard.
VOLTAGE RATING
300/500V
CABLE CONSTRUCTION
Conductor: Annealed or tinned copper, sizes: 0.5mm² and 0.75mm² mulitistranded(Class 5), 0.5
mm², 1.0 mm² solid(Class 1), 1.5mm² or 2.5mm², multistranded(Class 2) to BS6360
Insulation: XLPE (Cross Linked Polyethylene), or PE (optional)
Pairs: Two insulated conductors uniformly twisted together with a lay not exceeding 100mm
Individual Screen: Aluminium/polyester tape is applied over each pair metallic side down in contact
with tinned copper drain wire, 0.5mm²
Binder tape: PETP transparent tape
Overall Screen: Aluminium/polyester tape is applied over the laid up pairs metallic side down in
contact with tinned copper drain wire, 0.5mm²
Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH
compound type SW2-SW4 as per BS 7655-2.6 can be offered.)
CONSTRUCTION PARAMETERS
Number of Pairs |
No./
Nominal Diameter of Strands |
Nominal Conductor Cross- Section Area |
Nominal Insulation Thickness |
Nominal Sheath Thickness |
Nominal Overall Diameter |
Approx. Weight |
No./mm |
mm2 |
mm |
mm |
mm |
kg/km |
2 |
1/0.8 |
0.5 |
0.5 |
0.9 |
9.7 |
95 |
5 |
1/0.8 |
0.5 |
0.5 |
1.2 |
13 |
180 |
10 |
1/0.8 |
0.5 |
0.5 |
1.2 |
16.9 |
310 |
15 |
1/0.8 |
0.5 |
0.5 |
1.3 |
19.7 |
440 |
20 |
1/0.8 |
0.5 |
0.5 |
1.3 |
22.3 |
560 |
30 |
1/0.8 |
0.5 |
0.5 |
1.5 |
27.1 |
820 |
50 |
1/0.8 |
0.5 |
0.5 |
2 |
35 |
1370 |
2 |
16/0.2 |
0.5 |
0.6 |
1.1 |
11.2 |
110 |
5 |
16/0.2 |
0.5 |
0.6 |
1.2 |
14.5 |
250 |
10 |
16/0.2 |
0.5 |
0.6 |
1.3 |
19.3 |
480 |
15 |
16/0.2 |
0.5 |
0.6 |
1.5 |
22.6 |
570 |
20 |
16/0.2 |
0.5 |
0.6 |
1.5 |
25.7 |
780 |
30 |
16/0.2 |
0.5 |
0.6 |
1.7 |
31 |
1020 |
50 |
16/0.2 |
0.5 |
0.6 |
2.2 |
39.9 |
1680 |
2 |
1/1.13 |
1 |
0.6 |
1.1 |
11.9 |
200 |
5 |
1/1.13 |
1 |
0.6 |
1.2 |
15.4 |
290 |
10 |
1/1.13 |
1 |
0.6 |
1.3 |
20.5 |
580 |
15 |
1/1.13 |
1 |
0.6 |
1.5 |
24.1 |
780 |
20 |
1/1.13 |
1 |
0.6 |
1.7 |
27.7 |
1010 |
30 |
1/1.13 |
1 |
0.6 |
2 |
33.7 |
1430 |
50 |
1/1.13 |
1 |
0.6 |
2.2 |
42.5 |
2360 |
2 |
7/0.53 |
1.5 |
0.6 |
1.2 |
13.6 |
250 |
5 |
7/0.53 |
1.5 |
0.6 |
1.3 |
17.7 |
460 |
10 |
7/0.53 |
1.5 |
0.6 |
1.5 |
23.9 |
760 |
15 |
7/0.53 |
1.5 |
0.6 |
1.7 |
28 |
1020 |
20 |
7/0.53 |
1.5 |
0.6 |
2 |
31.7 |
1350 |
30 |
7/0.53 |
1.5 |
0.6 |
2.2 |
38.6 |
1900 |
50 |
7/0.53 |
1.5 |
0.6 |
2.2 |
48.9 |
3060 |
|
